new guy
Whats goin on? Well got a few questions and im fairly new to to the diesel bombing.im buildingan 04.5 2500 2wd Cummins so far the list is no. 1 is sleeved .20 over on all and decked, a1 studs, ported ex side of the head and manifold silver 66 turbo,120HP injectors,arson 4 and smarty tntr.my question is what should my break in consist of,oil,tuner setings, miles etc.and is there anybody from the Odessa/midland area.o and what kinda rwhp can I look forward to.thanks in advance:rocking:
---AutoMerged DoublePost--- O and Hamilton 110 springs |
Originally Posted by brokekitty
(Post 863000)
Whats goin on? Well got a few questions and im fairly new to to the diesel bombing.im buildingan 04.5 2500 2wd Cummins so far the list is no. 1 is sleeved .20 over on all and decked, a1 studs, ported ex side of the head and manifold silver 66 turbo,120HP injectors,arson 4 and smarty tntr.my question is what should my break in consist of,oil,tuner setings, miles etc.and is there anybody from the Odessa/midland area.o and what kinda rwhp can I look forward to.thanks in advance:rocking:
---AutoMerged DoublePost--- O and Hamilton 110 springs OIL 15w40 of your preference TUNER I would drive it like I would if it had 100k on it that's just me RWHP don't have a clue |
Fuel? For now I have a Holley black and arson 4 with 120 HP nozzles.any addatives for oil?
|
Of I was going to put that kinda money into my truck I would defiantly be putting in an air dog or fass or a raptor pump. I have a Holley black and I don't see it supporting the mods you have now. I might be wrong but I know with my setup I pull it down low.
I wouldn't add any additives just run the oil you plan on running from now on. |
Defanantly an airdog in the very near future lol and tranny still stock :scare2:.what oil do u recomend,rotela?
|
I run rotella but this is opening a can of worms about oil. Now there is a guy on here with a stock truck with 700k on it and still running strong all he had run is rotella roadmedic is his name. But I guess any 15w40 is better than none.
|
I have personally seen rod bearings out of a truck with 325k that looked new all she ran was delo 400 from first oil change.
Run what you want is what I say I won't knock anyone who takes care of there truck |
Ive had good luck in my hotrods with it.and leave the tuner off for break in,and how many miles should it take
|
Originally Posted by brokekitty
(Post 863314)
Ive had good luck in my hotrods with it.and leave the tuner off for break in,and how many miles should it take
|
If you have a stock tranny you have no hope running tnt-r yet alone a silver 66 or 120's. You need to get that built asap and also be running a airdog. Also look into fuel pressure and rail pressure gauges
|
All times are GMT -5. The time now is 07:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands