Sounds to me like a caliper may be sticking. Had this problem on a couple of other vehicles in the past. You can buy a caliper rebuild kit at your local parts store, but I've never had much luck with it. Another possibility is a line is collapsing. Brake fluid will break down the inner lining of rubber lines over time. I wouldn't think that would be the problem with an '05 though.
|
If you decide to change out, go with HAWK pads and rotors.. Spend a lil more up front, but they are an upgrade for the HD trucks... Cheaper than Brembo...
|
You could try to sand the brake rotors to reduce the glaze. I have done this every pad change and never had a squeak
|
Lubricate the caliper slides with the anti squeal grease and that will probably cure the problem :c:
|
Originally Posted by tiremann9669
(Post 729215)
Lubricate the caliper slides with the anti squeal grease and that will probably cure the problem :c:
|
All times are GMT -5. The time now is 06:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands