DIY
 

hew a friend of mine just picked up a lightly used 2006 dodge 2500 ( with a cummins of course)....since he spent a lot on the truck his budget is kind toast but he still wants to play around a little bit. So my question is what are some cheap "diy" mods i can do to his truck on the cheap like 200 or less.....i already custom made him a new exhaust using the stock tubing: i punched out the cat and did a muffler delete. any advice is welcome.

remove silencer ring

Remove the baffles from the torque tube.

since you did tha already
i would look into an edge ez, quadzilla mileage module, there are a couple more companies selling pressure boxex
just search around for a used pressure boxes they are cheap and easy on the wallet
o you could get a big airfilter from napa

ok tell me more about the silencer ring and the torque tube baffles??? Wel alreadys did the big friggin air fliter i forgot to mention it.

All the fins do is reduce turbo whine. http://i209.photobucket.com/albums/b...TB06/005-2.jpg

ok whats the silencer ring and how do i take it out

Attachment 57195

https://www.dieselbombers.com/5-9l-12v-bombs-aftermarket/9029-silencer-ring.html#post111429 :D

nice thanks. hey i was thinking his truck is throwing codes because of the mass air flow thing i took off. i was thinking of getting a bhaf and tapping into the rubber intake elbow and screwing in the mass airflow thing.... will that work

i dont think so, the MAF sensoe is position in the right spot, if could alter the reading is its not where is supposed to be