Ok. Thanks

Sent from my dumb phone!

#1 is the location of the block mounted LPs in the diagram below. :tu:

Ok.its jarrod right? I don't believe it'd on the block, the cylinder looking thing I saw was mounted flat not up and down like the picture shows

Sent from my dumb phone!

Yes it is Jerrod, the flat top cylinder looking thing is probably #6 on the diagram which is your stock fuel filter location. Look Below and back toward the firewall to find #1 if you have it.

on my 99 24 valve it was behind the fuel filter and a little lower with 2 lines on the top of it if you change it a fuel pressure gauge would also be a good idea i also think there is a vedio on youtube how to change it

Yes I know where that's at.this cylinder im talking about is behind and below it on the block, and it already has a fuel pressure gauge hooked up it looks like just no gauge

Sent from my dumb phone!

If you can't see it my friend then do the listen test. Other then that I can't help you out much more without actually being there. :c:

Ok that's what I planned on doing in tommorow after work. Thanks jerrod ill report back tommorow.

Sent from my dumb phone!

You bet man. :tu:

While were on the subject of fluids. should I just replace FF with molar or is there something better out there? What about OF?

Sent from my dumb phone!