Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   Key Trick got me 4 codes (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/99019-key-trick-got-me-4-codes.html)

brianb883 07-10-2012 12:51 PM

Key Trick got me 4 codes
 
I just bought a 2002 Ram 2500 with a Cummins S.O. and a 5 speed. Only 80k miles. I just did the "key trick" (on off three times) and got 4 codes!

The truck has no check engine light, runs completely fine, and while I've only put 350 miles on it since I picked it up, I've done highway and city driving. It seems to drive perfectly.

The codes are:
P1388
P0216
P1693
P0460

Could these be stored from a previous issue the last owner had?

The engine is incredibly clean, so much so I suspect it may have been pulled at one point, it just looks too "new" and all of the orange thread lock is still very bright, along with blue marks on the engine head.

In addition, the front hang point is slightly bent, and looks as if a chain was hooked up to it.

It does have a Jake Brake on it, but I don't think that installing would require an engine pull...

Any help is appreciated!

---AutoMerged DoublePost---

Bump...

I'm a little worried, does anybody have any insight?

empty wallet 07-10-2012 01:15 PM

All those brackets come bent from the factory, but what would have me worried is p0216, thats injection pump code.

brianb883 07-10-2012 02:06 PM

Check engine light and not showing any symptoms so could it be a prior problem

vineyardm 07-10-2012 04:16 PM

And ...did someone pull out the light bulb behind the "Check Engine Light" so that nobody would be asking tough questions?? (Does the CEL light briefly when key is first turned on??)

brianb883 07-11-2012 09:24 AM

The check engine light definitely turns on when I turn the key onto the bulb has not been taken out

empty wallet 07-11-2012 09:41 AM

You can have codes without the check engine light. other codes your showing are auto shutdown relay p1388 and fuel level sending unit p0460.... p1693 means there are ecm/pcm companion codes, you should use a good scanner to see what they are.

I highly doubt p0216 is stored. If your truck has 80k and it's been on stock lift pump its whole life... its time is probably up.

brianb883 07-11-2012 08:55 PM

Ok thanks for the tip. I'm visiting a mechanic that specializes in Cummins diesels tomorrow, and he offered to scan my truck. So I'll see. Like I said, I've noticed no symptoms of a VP44 malfunction, and am getting plenty of power. Also just averaged 17.5 mpg combo of city/highway driving.

In NC part of our state inspection is OBDII, and the truck JUST passed. Typically, if there are any trouble codes, it won't pass. I know this because my other car is a land rover discovery that likes to throw check engine lights right around inspection time every year...:argh:

Dodgemanstan 07-11-2012 09:22 PM

I would go to a well know diesel mechanic around your area and see what codes they can pull up with a true deep scan on the truck.... That way you know for sure what codes are there.


All times are GMT -5. The time now is 10:53 PM.


© 2024 MH Sub I, LLC dba Internet Brands