Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   any ideas?? (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/96643-any-ideas.html)

James98&1/2 05-25-2012 10:43 PM

Sometimes it works, sometimes not. Could be a pump problem. Have you checked fuel pressure? Where is your lift pump located? In the tank or on the frame rail?

twitchytuff 05-26-2012 05:51 PM

its on the side of the bolck. i dont know wat my fule pressure is i dont have a guage or the tool to test it.

twitchytuff 05-29-2012 10:55 PM

well i just checked the apps with a volt meter and it was reading 2.42 and the whit sticker on the back says it should b at .568 could that b the issue?

01quadcab 05-30-2012 01:35 AM

your truck could be starting in 2nd too you could have a valve body issue or your tv cable is too tight. try pulling it into 1st and see what happens.

twitchytuff 06-10-2012 05:44 PM

i finaly got my truck to throw sum codes for me doin the key on-off-on-off-on and i got a 1693 pcm, 1698 ecm, and a 0122, i found sume codes on line and the 0122 is the apps volt is to low. i set it from 2.5 down to .586 like the sticker on the back said. could i need a new apps? and i also found out that the 1693 said generic fault in the bus or pcm/ecm interface. idk wat the pcm or ecm r. any ideas on where i should go from there? i couldnt find 1698 code

mind if i smoke24 06-13-2012 10:05 AM

smoke
 
hey guys i have a 1999 Dodge 3/4 ton 2wheel drive it has a five speed in it and i was wondering if i was to put a diablo sport puck on my truck if it would make it smoke more or does anyone have any ideas hel plz.

---AutoMerged DoublePost---

is there anyway to build more boost on a 1999 24 valve

Baradium 06-14-2012 02:55 AM


Originally Posted by twitchytuff (Post 903573)
i finaly got my truck to throw sum codes for me doin the key on-off-on-off-on and i got a 1693 pcm, 1698 ecm, and a 0122, i found sume codes on line and the 0122 is the apps volt is to low. i set it from 2.5 down to .586 like the sticker on the back said. could i need a new apps? and i also found out that the 1693 said generic fault in the bus or pcm/ecm interface. idk wat the pcm or ecm r. any ideas on where i should go from there? i couldnt find 1698 code

Did you do it with the key on or off? It needs to be set with the key on. That 2.5 sounds like the reading I showed with my key off is the reason I ask, so if you did that you could have set it too low.

twitchytuff 06-15-2012 01:19 AM

i did it with the key on.


All times are GMT -5. The time now is 02:04 AM.


© 2024 MH Sub I, LLC dba Internet Brands