Head Gasket
So yesterday my head gasket went out. So i ordered one and my buddy read up later that night and he says there are 3 different gaskets that could go on my 2001 Dodge Cummins is that true.
|
Don't think I would order a gasket until I knew the condition of the head? If you have to take .10 out then you'll need to compensate.
Sent from my DROID BIONIC using Tapatalk |
Well I went to pass a car and then went a mile to school n noticed oil coming out of the head gasket
|
I think he meant if there is damage to the head... Warped or such..
Was it coming out of the very front or front/side by exhaust manifold? Have you checked your coolant yet? Its probably full of oil too. IF your going to mod the truck or already have... Spend the 400$ to have the head O-rings installed! Spend another few hundred on ARP head bolts. Its worth it. Plus then you can hold down 80psi of boost! LOL! OH and i only tell you this because the SAME thing happend to me.... Running 35psi on stock turbo is a BAD idea! |
It was coming out the front of the head and i'm tight with money so im just going to go with a stock one for now untill this summer:tu:.
---AutoMerged DoublePost--- Also there was no oil in my coolent o and very front of the head |
make sure you deck your head and use a cummins brand gasket.:hellox:
|
Ok thank you guys
|
What was your problem with your head? I have the same problem right now and im looking for answers
|
All times are GMT -5. The time now is 04:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands