Diesel Bombers
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   24v fuel economy crap. need valve adjustment? (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/91134-24v-fuel-economy-crap-need-valve-adjustment.html)

sthrnrider 02-10-2012 09:16 PM
Is this hand calculated or looking at the overhead? More info on the truck please. Mods 4x4?

H.R.D 02-10-2012 10:50 PM
Originally Posted by sthrnrider (Post 857249)
Is this better HRD lol
Much better!! :tu::c:

RanchhandTCR 02-10-2012 11:27 PM
I just adjusted my valves because my mileage went down hill it made a difference. Also turbo spools up faster and sit me back into my seat now :) IM HAPPY!!!

BarryB 02-11-2012 09:51 AM
Originally Posted by H.R.D (Post 857139)
Easiest way to find out if it will help you is by doing it.:tu:

Below are some pdf files that can help you a lot on resetting your APPS and Overhead.
Thats it?? On the apps reset! I've read post where guys were removing the apps and setting them by a voltage meter. What was the purpose of them doing it that way?

starrysky111 02-15-2012 07:09 PM
im not sure in the gears in the rear but @ 70 in 6th in turning 2000. all my mods should be in my sig.

RanchhandTCR 02-15-2012 08:21 PM
Originally Posted by starrysky111 (Post 859686)
im not sure in the gears in the rear but @ 70 in 6th in turning 2000. all my mods should be in my sig.
Most likly 3.73s...

puffsmokeonya 02-15-2012 10:32 PM
:moon:
Originally Posted by RanchhandTCR (Post 859754)
Most likly 3.73s...
not with a 02 its 3.55 or 3.54

wyodiesel92 02-16-2012 03:55 PM
My 01 turns around 2000 at 70 with 3.55s check for a dealer equipment sticker under the hood or in the glove box. It will tell you gearing

starrysky111 02-16-2012 11:12 PM
ya its got 3.54s but that seems awful high rpms for those gears i would like to se it down around 1600 at 70 would be nice

CUMMINStagetcha19 02-18-2012 06:51 PM
Originally Posted by starrysky111 (Post 860218)
ya its got 3.54s but that seems awful high rpms for those gears i would like to se it down around 1600 at 70 would be nice
look for a gear ratio calculator. enter in all your info, and figure out what size tire's you'd need to get to 1600 rpms at 70mph. and it's pretty sweet to mess with. this is one i use most. Gear Ratio Calculator its pretty sweet.


All times are GMT -5. The time now is 02:11 AM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands