V10- cummins swap
I have a 01 dodge with the v10 and I fixing to put the 5.9 24v cummins in it. it is automatic and I need to know all the partthat has to be change
|
Harnesses, motor mounts, bell housing, what kind of transmission the 4RE?? Im not 1000 percent sure what dodge ran with the v10. Were going to do that with a friend of mine V10 one day but till then hes got a 6.7L Cummins to drive.
|
it should have a 47re, and bell housings are the same
|
Do I have to do any tranny work
---AutoMerged DoublePost--- It has the 47 re do I have to change the fuel pump |
there will be some trans work needing done as something inside is different and I can't remember what. yes you will need a different fuel pump and have to remove the intank gas pump and put a draw straw in and a good fass fuel system on and have no fuel issues
|
whats the best fuel system to put on it i want to have 450 to 500 hp when its done and i dont wat to have to worry about fuel problems so all i need is motor mounts wiring harness and do trany work does anyone know if the computer comes with the harness is there anything else that i need to get
|
Originally Posted by Joshholtzclaw109
(Post 846918)
whats the best fuel system to put on it i want to have 450 to 500 hp when its done and i dont wat to have to worry about fuel problems so all i need is motor mounts wiring harness and do trany work does anyone know if the computer comes with the harness is there anything else that i need to get
|
Originally Posted by RanchhandTCR
(Post 847082)
Fass are good pumps you gonna want 150 gph or more, I redo alot of things wile you have the engine outta the truck. New injectors have a worthy injection pump a stock VP44 will not live if you want 400-500 HP outta it. Nor will a stock P-Pump.
|
All times are GMT -5. The time now is 09:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands