cummins injector question?
i am just about to install a set of 150hp nozzles on my truck and i dont know what to torque the nozzles down to. anyone?
|
Originally Posted by holset cummins
(Post 839818)
i am just about to install a set of 150hp nozzles on my truck and i dont know what to torque the nozzles down to. anyone?
|
If you are referring to the bolts that hold down the injector, they are 10 N·m (89 in. lbs). Those tiny bolts will snap well before 35ft.lbs.
|
it did. thank you:tu:
|
Originally Posted by holset cummins
(Post 839818)
i am just about to install a set of 150hp nozzles on my truck and i dont know what to torque the nozzles down to. anyone?
I hope your having them pop tested before you install them in your truck. |
do you know if i would need a boost fooler for my truck. i have heard of defueling but i want to make shure before i buy one?
|
What all have you done to your truck?
|
right now i have an edge ez tuner and a 150 gph rapter with all 1/2" line. i think with the 150 injectors and the chip set on the lowest setting, it shouldnt smoke that bad from a stand still and still have good power
|
Smoke will also depend on the quality of nozzle. Did you have them pop tested?
Luke |
no and i was wondering if i need to have them pop tested or can i get away with not doing it. what is the purpose of a pop test anyways?
---AutoMerged DoublePost--- and these are the nozzles i am looking at eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices |
Not having them pop tested means that each injector will open at a different pressue. Which means it will idle like crap and probably not run very good either.
|
how much does it cost to get all 6 pop tested and are those nozzles ok. i know they arnt the best but thats the last thing i am doing fuel wise and with a stock turbo, i dont need perfect flowing injectors
|
Originally Posted by holset cummins
(Post 840342)
how much does it cost to get all 6 pop tested and are those nozzles ok. i know they arnt the best but thats the last thing i am doing fuel wise and with a stock turbo, i dont need perfect flowing injectors
|
All times are GMT -5. The time now is 06:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands