help bad turbo?
Hey y'all I took my exhaust off the other nite to put my new 5" on and noticed the downpipe had quite a bit of oil in it so I was just wondering is it time for a rebuild or what do you guys think truck runs fine and boosts just fine I have hit 50 psi with it never seen egts over 1300 for a few seconds
|
Is there oil anywhere else, as in on the clean air side? Oil, or unburnt fuel? Cold weather idling can cause the fuel to not completely burn, and look like oil in the exhaust. I've seen it quite a bit on construction equipment as some operators let their machines run all night when the temps get way down.
|
Havnt checked the clean air side and when I pop the hood everything looks like normal no oil splatter or anything of that sort
|
Your turbo is bypassing oil thru the bearing center section into the exhaust. 50 psi boost and 1300 degrees are both hard on the turbo and stress the internals. It will spin still well and last for a while but the right thing to do is buy a rebuild kit (less than 100 bucks) and take the small amount of time to rebuild it. And then be nice to it until you get a bigger one.:tu:
|
not 2 steal ur thread but when i changed my intercooler boots i seen oil in the pipe commin from the turbo 2 the cooler. is that sayin i need 3 rebuild my hx35?:humm:
---AutoMerged DoublePost--- Jake how the hell do u hit 50#s with a hx35:humm: ---AutoMerged DoublePost--- :pca1: |
its probably blow by
|
Originally Posted by XxBlackSmokeKingxX
(Post 662985)
its probably blow by
All your posts are about blow-by this and that ? |
Thanks guys got a rebuild kit on the way. Matt to be honest I have no idea how I got 50psi out of it I got the hot unlock and updated software and I was on the freeway and punched it and that's what I saw haha even have a video on my phone of it haha
|
:c: thats insane:scare2: good thing u diddent blo a hg:c:
|
That's the first thing that came to my head when I saw that haha but I have studs comin so hopefulling have the compounds on here in the next month or so nice truck by the way you lookin to get some injectors soon?
|
All times are GMT -5. The time now is 12:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands