cruise quit
we changed the injection pump on my dads 01 cummins and now the cruise don't work. it worked before the pump went. I have been reading that the computer just need to be flashed but don't know. Is this normal, or is there something i'm missing here. :humm:
any advice would be much appreciated :hellox: |
check the vac. line for the cruise. it goes under the driver's battery to the canister. mine was broken. it gets brittle with age and heat.
|
As advised, check all vaccume lines. And the servo is under drivers side battery.
|
:tu:thanks for the info, we ran out of light last night but will check that out this evning
thanks ---AutoMerged DoublePost--- dad got to look at it this morning and yall were right it should be an ez fix :tu::tu::tu::tu::tu::tu: |
All times are GMT -5. The time now is 11:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands