1999 cumins oil pressure
i have a 99 cummins and the oil presure gauge is very weird it comes on some times others it doesnt but theres new clean oil in it i just not sure if its the sensor or a sending unit what do you think? thank you
|
I moved your thread into the Cummins section... Might get more exposure here.
I dont know a ton about the Cummins motors, but I would bet its a sender issue... |
Change the pressure sender out and all will be good again. :tu:
|
Okay ill look into that thank you
---AutoMerged DoublePost--- Where is the sending unit and sensor if you know thanks |
24 Valve Fuel System Components It is number 22 on the diagram.You can get the part from cummins.
|
Originally Posted by countryboy4450
(Post 553833)
i have a 99 cummins and the oil presure gauge is very weird it comes on some times others it doesnt but theres new clean oil in it i just not sure if its the sensor or a sending unit what do you think? thank you
Mine did that and it was the oil pressure sending unit. You need to get it from cummins not Dodge about $70 Dodge $250 or so. and if you do a search you can get the same replacement not a supstituted that needs additional computer flashing. $20 + $200 flash. the part is from a TDR quote and it worked fine without a Dodge computer flash for Me ED Offline Join Date: Oct 2002 Location: Connellsville PA Posts: 1,004 Old Reader's Rigs Gallery For those of you who have been following this thread or may be finding this on a search, I want to confirm that the oil pressure sending unit is available direct from Cummins under the part # 4921511 as mentioned in a previous post. At least in my 2001, it is a direct replacement and does not require a reflash or any adaptation to work correctly. I did this replacement last evening in my truck and it works perfectly. Here is a photo of the packaging. |
wait to start light
today i noticed my wait to start light isn't working ... i'm new to the cummins family .. i don't know what to check .... any advice would be appreciated.... thank you so much !!! Richard
|
bought one from these guys about a year ago. havent had any problems since, and its a genuine cummins part.
'98.5-'02 Dodge Turbo Diesel Oil Pressure Sensor-Geno's Garage |
Originally Posted by alittle5150
(Post 940106)
today i noticed my wait to start light isn't working ... i'm new to the cummins family .. i don't know what to check .... any advice would be appreciated.... thank you so much !!! Richard
|
oil pressure
I had the same problem with my oil pressure so I bought a new sending unit from Cummins for $67.00. When we tried to install we had the wrong sending unit. We cleaned the old sending unit connector and wire, Bingo all works well. I just returned the new sending unit to Cummins. Good luck.
|
All times are GMT -5. The time now is 07:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands