need ideas
 

Ok i sold my quad addr. and now i have no probe for egt what can i do to seal that whole up till tax time

use a light right foot

Should be able to find a plug to just thread into the hole:tu:

Pretty sure those will take a 1/4" pipe plug.

its that 1/8 27 npt or ntp tap so do you know what the thread size is i was thinking about just using a short screw would that work

When I removed my Edge Attitude w/Juice to send away for repairs, and removed the EGT probe, I used a -4 JIC cap to plug the port. The EGT probe sleeve was still in the manifold, and threads sticking out. Not sure if you still have the sleeve in or not, but that's what worked for me.

whats a JIC cap

---AutoMerged DoublePost---

are most egt probs use the same thread quads is 1/8 27npt and i will be going to a edge drag comp maybe and glowshift gauges

---AutoMerged DoublePost---

i just have to pug that whole and i need somthing that i can get from a little local hardware store bec i aint driving an hour and half to get to lows or somthing like that

1/8" npt pipe plug. I will have a set of autometer gauges if your interested boost pyro and mech fuel pressure gague. just no pod for a good price when your ready.

ok that cool Il let ya know it will be a couple weeks like first of the month

JIC is a type of connector for hydraulic hoses. It is a cone type seal that relies on an interference fit to seal. It sealed my port up very nicely.