Diesel Bombers - need ideas

Page 2 of 2

Show 40 post(s) from this thread on one page

Diesel Bombers (https://www.dieselbombers.com/)

- 24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)

- - need ideas (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/40806-need-ideas.html)

cummins24

01-15-2010 10:32 AM

a short 10mm fine thread bolt did the trick on my 99

Dr. Evil

01-15-2010 11:44 AM

Quote:

Originally Posted by NCFPD (Post 472054)

its that 1/8 27 npt or ntp tap so do you know what the thread size is i was thinking about just using a short screw would that work

A screw wont work - you need npt threads which you can find on a pipe plug.

Get a 1/8" NPT pipe plug. Unplated cast iron will work just fine. Use some hightemp coating on the threads if you want to take it out later (Coppercoat or Nickle Neverseize)

NCFPD

01-15-2010 12:37 PM

i didnt put nothing on it but i found me a 1/8 pipe plug i will put something on as soon as i can get out to buy something thanks alot guys

01quadcab

01-16-2010 01:15 AM

Quote:

Originally Posted by NCFPD (Post 472123)

ok that cool Il let ya know it will be a couple weeks like first of the month

Not a problem. I have $125 into them will sell them that to you shipped.

All times are GMT -5. The time now is 04:32 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page