Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   need help (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/34421-need-help.html)

big baby sweets 10-17-2009 01:07 AM

need help
 
im looking to get some injector nozzels for my 99 cummins 24 valve. i need to know how to pull the injectors and/or if its even worth just replacing the nozzels. should i just get the whole injector? im just looking to get a little more power.

DB Admin 10-17-2009 06:55 AM

You cant just replace the nozzles with out having them pop tested and if you get full bodied injectors chances are they will want your cores. What is all done to your truck?

big baby sweets 10-17-2009 12:21 PM

well i have gotten a new electric tyransfer pump, was told if i start doing anything to my truck that i would need to that first. other than that, i have t straight out 3.5 inch exhaust. not much it keeps up with my friend powerstroke. just want it to be a little faster.

DB Admin 10-17-2009 12:27 PM

Get a programmer

-Sugar Bear

big baby sweets 10-17-2009 12:39 PM

oh ok any kind you recomend? i have another question. for the longest time i had to wait for my wait to start light to go off to start my truck, thats normal. well a few weeks ago i noticed that it never comes on any more, and i can just hop in and start it right up. should i be worried abut anythin? im kinda new to diesels.

Diesel Dawgs Performance 10-17-2009 05:31 PM

It all depends on the outside temp.


Id go with a Quad Adrenaline or Edge Comp :U:

big baby sweets 10-19-2009 09:59 PM

thanks for the help

Diesel Dawgs Performance 10-19-2009 10:16 PM

let me know if I can help.


Luke

RAW 10-19-2009 11:24 PM

My High Beam indicator stopped working a while ago, so I pulled the gauge cluster, and swapped it with a matching bulb on the back side, and re-installed. I had high beam indicator, but no Wait To Start light. I bought a new bulb, and replaced the bulb in the wait to start hole. All works fine now. If you pull your cluster, you need to remove the dash trim, and 4 screws i believe. The most important part it to loosen, and disconnect the cable that runs from the gear indicator, to the steering column (if an Auto of course). I didn't the first time, and it took some trickery to reattach the wire to the end piece.

big baby sweets 10-21-2009 11:19 AM

i need to get ahold of 01quadcab. i cant send messages for some reason. if you read tyhis i need a couple of weeks and ill get it from you.

---AutoMerged DoublePost---

RAwilliams, why would just the light change how fast my truck starts? im just wondering. because now i can get in and start it like a gas engine, no waiting at all.


All times are GMT -5. The time now is 08:54 PM.


© 2024 MH Sub I, LLC dba Internet Brands