Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   help truck won't start (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/22623-help-truck-wont-start.html)

wake26 02-20-2009 10:48 AM

help truck won't start
 
was hedding home yesterday and was coming to a stop and the truck died, pulled over and put the truck in park and all it does now is turn over will not start. you can har the air dog pumping the fuel and I didn't get a check engine light at all either. any suggestion on what might of happened?????:humm:

stkdram55 02-20-2009 10:53 AM

do you have a fuel pressure guage to make sure the pump is actually working...does have any codes even though it doesnt have a CEL doesnt mean it didnt throw a code

cumminsman65 02-20-2009 10:54 AM

I aint any expert but i was taught since birth all a diesel needs to run is fuel and air, work it backwards from both ends and you should find the problem. prolly aint no help.

runnin good before it died?

mishkaya 02-20-2009 11:16 AM

Are you sure you are getting fuel to the injection pump? My guess is you are not. If you are, it's most likely the VP44 that is the culprit. If you are getting fuel to the injection pump, you need to crack the injector lines to see if you are getting fuel to the injectors. Welcome to Dieselbombers by the way, sorry your first post has to be for help.
mishkaya

Whit 02-20-2009 12:27 PM

I agree with Mishkaya................crack injector lines 1,3,4 and bump the starter to trigger the air dog.......do this 3 times the tighten the lines down and re-start..............give 1/4 throttle and start it up

wake26 02-20-2009 12:35 PM

It was running good before it died to me it didnt show any signs that something was wrong. I will check the supply lines and the injection lines when I get home. Will the VP go out that quick?????

cumminsman65 02-20-2009 12:43 PM

Iv never heard of a VP44 going out withou any warning sighns, stupid ? but you do have enough fuel in the tank right?

wake26 02-20-2009 04:16 PM

getting fuel to IP but no further nothing comes out of the injecter lines. throws code p0253. the reader says to test the pins 6&7 on the plug on the back of the IP. we have power on 7 but nothing on 6. any body have any Ideas. yea full tank

Whit 02-20-2009 04:23 PM

po253 code is open circuit to fuel injection pump.......aint good

I say go back out there and try again, crack inj lines 1,3,4 and bump starter to move some fuel, tightem em back up and try to start with 1/4 throttle...................if its got fuel than it will run

mishkaya 02-20-2009 05:36 PM


Originally Posted by wake26 (Post 291565)
It was running good before it died to me it didnt show any signs that something was wrong. I will check the supply lines and the injection lines when I get home. Will the VP go out that quick?????

I have seen more VP44 just plain quit than I care to mention. They can fail without any warning whatsoever at any point. My guess is you are in for a replacement. On the plus side, you might like to know that the recently remanufactured pumps are MUCH more reliable than before. Hopefully your next pump will give you many trouble free miles.
mishkaya


All times are GMT -5. The time now is 01:41 AM.


© 2024 MH Sub I, LLC dba Internet Brands