Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   wont start (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/19956-wont-start.html)

outlaw1_gt 12-23-2008 06:43 AM

wont start
 
ok a friend at work has a 98.5 Cummins 90,000 miles stock no gauges. he started his truck to warm it up last Tuesday went inside and went back out to find his truck not running. he has fuel but it wont start.. any suggestions? :argh:

stkdram55 12-23-2008 07:24 AM

any codes?? How cold did it get?? Fuel might of jelled up on him:humm:

outlaw1_gt 12-23-2008 07:31 AM

dont have anything to check codes. dont think it was that cold.. it is now lol. he also just put fuel in it the day before this happened...

stkdram55 12-23-2008 07:40 AM

should be able to do the key turn to check it

outlaw1_gt 12-23-2008 07:54 AM

didnt think of that since i cant even get mine to do it...

Whit 12-23-2008 07:59 AM

he may have a plugged up fuel filter,if a transport was dropping fuel when he filled up he may have gotten alot of sediment and plugged the filter

if its cold now he may be gelled up too.................get some 911 fuel additive and when ya change the filter pour some in there while yer at it

outlaw1_gt 12-23-2008 08:06 AM

just changed filter yesterday had fuel filling back up when turned key on

dukeboy_318 12-23-2008 12:47 PM

mine gelled sunday night at 1 degree above 0 at actual temp but with -37 wind chill, ever since the switch to ulsd, ive had fuel gel 4 times in 3 trucks, all with the temps below or at 0 degrees F. it is possible as well that if its getting fuel to the VP, you could have a injection pump problem., also check the fuel heater and grid heater for continuity and see if they actually work.

Whit 12-23-2008 02:49 PM


Originally Posted by outlaw1_gt (Post 257568)
just changed filter yesterday had fuel filling back up when turned key on


you lost yer prime then

crack injector lines 1,3,4 and bump the starter to run the lift pump.....do this 3 times and then tighten the lines down then she will run

outlaw1_gt 12-23-2008 03:27 PM

ok ill talk to him in the morning and we will give it a try


All times are GMT -5. The time now is 02:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands