Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   Where to get steering upgrade (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/132863-where-get-steering-upgrade.html)

Wyatt129 03-23-2017 02:01 PM

Where to get steering upgrade
 
Hey guys just signed up and was searching to find good setup for my steering. Found that the 09-10 setup should work on my truck but the thread I found was $262 for the setup. I was curious as to where I could get a steal like that since the local dealership quoted me over $600!! And advice on where to go? Thanks!!

Bryce 03-23-2017 08:48 PM

I put the 09+ steering on my truck. Works great other than on mine the stud that attaches to the pitman arm was too long. When I first put it on if I hit bumps big enough to bottom out the suspension the stud would hit the tie rod bar. I cut it back almost flush with the nut and haven't had any more problems. I got mine off ebay from a dodge dealership in north carolina I think been too long ago.

Wyatt129 03-31-2017 11:15 AM


Originally Posted by Bryce (Post 1129165)
I put the 09+ steering on my truck. Works great other than on mine the stud that attaches to the pitman arm was too long. When I first put it on if I hit bumps big enough to bottom out the suspension the stud would hit the tie rod bar. I cut it back almost flush with the nut and haven't had any more problems. I got mine off ebay from a dodge dealership in north carolina I think been too long ago.

how much did you end up paying? I just can't bring myself to put over $600 into that setup knowing I have a commercial account through Autozone

Bryce 03-31-2017 09:54 PM

Don't remember for sure it was 3 or 4 years ago but I'm pretty sure it was around 250.


All times are GMT -5. The time now is 01:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands