Diesel Bombers - Fuel PSI bounces all over

Page 2 of 2

Show 40 post(s) from this thread on one page

Diesel Bombers (https://www.dieselbombers.com/)

- 24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)

- - Fuel PSI bounces all over (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/111565-fuel-psi-bounces-all-over.html)

stodg73

04-25-2013 09:23 AM

1 Attachment(s)

This is a snubber hose, a grease gun hose. Make sure that there is at least a 90* bend in it to reduce the bouncing(water hammer).Attachment 35129

Kecker127

04-25-2013 10:46 PM

ohhhhh ok, i have no idea what it would have. not totally sure how old/new it is. ik the pump is 8 months old.

and what exactly would i use a snubber hose for? srry kinda late and im a bit confused. srry! :(

stodg73

04-26-2013 07:27 AM

The snubber is used to isolate the fuel pressure sending sensor from the violent 'water hammer' of the VP 44. This saves the sensor, it also reduces the bouncing of the needle.

All times are GMT -5. The time now is 05:30 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page