Diesel Bombers
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   01 HO Knock with video any ideas ? (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/103136-01-ho-knock-video-any-ideas.html)

Bigg Redd 10-08-2012 10:43 PM
Originally Posted by RanchhandTCR (Post 946695)
napa, thurobred diesel. Im not saying sleeves are bad, but its "one more thing to go wrong" water leaks. .60 overs can be bought, I have a set sitting inside a 4BT cummins at the moment... its a to each his own.
Ya got that 4bt in something or current/ future project?

RanchhandTCR 10-08-2012 11:46 PM
Originally Posted by Bigg Redd (Post 946866)
Ya got that 4bt in something or current/ future project?
In a Case 580K backhoe.. But I lied your are correct I looked at the reciept its .40 over, there and went back and its purediesel not thurobred and their kit is .40 max sorry I spoke before I had the facts :argh: But agreeing with you and sleeving and engine, but I do have questions about doing it to a parabore thats where I get worried, I have considerd when I rebuild my cummins just to sleeve it.. Wet or dry, but you can go dry with the 5.9L cummins its wet sleeving that scares me..

cummin_un_glued 10-09-2012 12:40 AM
Originally Posted by RanchhandTCR (Post 946695)
napa, thurobred diesel. Im not saying sleeves are bad, but its "one more thing to go wrong" water leaks. .60 overs can be bought, I have a set sitting inside a 4BT cummins at the moment... its a to each his own.
water leaks from a dry sleeve?

RanchhandTCR 10-09-2012 05:34 PM
Originally Posted by cummin_un_glued (Post 946893)
water leaks from a dry sleeve?
No water leaks from a wet sleeve I did not specifiy.. please excuse my horrible puncuation..

cummin_un_glued 10-11-2012 04:11 PM
Originally Posted by RanchhandTCR (Post 947158)
No water leaks from a wet sleeve I did not specifiy.. please excuse my horrible puncuation..
Ok but how do wet sleeves apply to a B series block? Sorry i just do not understand why you advise not to sleeve one.

Sent with a Droid RAZR in one hand and 14,000 volts in the other.

RanchhandTCR 10-11-2012 05:30 PM
Ok to start fresh, when he said sleeve I was not thinking dry sleeve for what ever reason I had at the time, so yes he can dry sleeve and leave the rest of the cylinders my mistake, and misunderstanding...

cummin_un_glued 10-12-2012 12:20 PM
10-4 makes sense now

Sent with a Droid RAZR in one hand and 14,000 volts in the other.

Moparguy55 10-23-2012 12:05 PM
Have not had a chance to check the compression on it yet. Towed 10k on a tag along a week ago pulling some serious grades and she pulled like a champ.


All times are GMT -5. The time now is 07:01 AM.
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands