Is getting rid of VE pump worth it?
Should I get a holly black or airdog or fass. Does this really help with power and MPG. I was told i have the bigger injectors but i dont know how to check for sure, will there be a stamp on the injector if I pull one out. my deisel mech said I should not need it on this truck.91.5 d 250. pump tweekd, dennt t pin. bhaf, 4 to 6 exhaust. all gauges up and running.
|
hahaha getting rid of ve pump???? you need to sell your truck and buy a honda
|
Originally Posted by fatirishguy
(Post 712890)
Should I get a holly black or airdog or fass. Does this really help with power and MPG. I was told i have the bigger injectors but i dont know how to check for sure, will there be a stamp on the injector if I pull one out. my deisel mech said I should not need it on this truck.91.5 d 250. pump tweekd, dennt t pin. bhaf, 4 to 6 exhaust. all gauges up and running.
I think what your meaning is should you get rid of you mechanical lift pump? not your VE > which is your injection pump the truck wont run with out that lol Theres no real way to check unless there branded they could be anything from SDX to DDP to 370's give me the numbers off them do you have an intercooler? being you say its a 91.5 I would guess so I would go airdog IMO I have one on all my rigs and sold LOTS of them they work flawlessly and the filtration is awesome not to mention there is NO lack of supply there is no real reason to get one based on your setup you dont have many big power mods if I were you I would go piston style lift pump they will make up to 300-350HP and there about 300 bucks less than an airdog Brice |
only thing he could gain from an air dog would be the removal of entrapped air in the fuel in turn make the girl quiet down a DB or two, and when big bad said a "piston pump" he meant the low pressure one. not the one that is meant to feed the P7100 which will blow about every seal you have in your IP. if you look around the site there's multiple threads that have the pump # and what it takes to install one.
|
Yea, drinking a little to much when i posted. I did mean the mech fuel pump. get a honda really my 2001 makes 605hp and 1234 trq. on the dyno yea im not a diesel guy. by the way thanks big bad diesel.
|
Your very welcome friend!
|
Originally Posted by fatirishguy
(Post 713479)
Yea, drinking a little to much when i posted. I did mean the mech fuel pump. get a honda really my 2001 makes 605hp and 1234 trq. on the dyno yea im not a diesel guy. by the way thanks big bad diesel.
|
Originally Posted by fatirishguy
(Post 712890)
Should I get a holly black or airdog or fass. Does this really help with power and MPG. I was told i have the bigger injectors but i dont know how to check for sure, will there be a stamp on the injector if I pull one out. my deisel mech said I should not need it on this truck.91.5 d 250. pump tweekd, dennt t pin. bhaf, 4 to 6 exhaust. all gauges up and running.
Bigger injectors? Meaning the 9mm bodies? I can't remember when they went to a 7mm.... |
What Do You Mean by All Gauges?
Originally Posted by fatirishguy
(Post 712890)
...all gauges up and running.
|
isspro pyro,boost,tranny temp and 3.5 in tach.
|
All times are GMT -5. The time now is 05:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands