Dual VE's
yup. the title says it. kicked it around on DTR for a while and came up with a plan. i got a few VE's im watchin on ebay so i can get started. NOT A DAILY DRIVER
2 VW pump pulleys 1 VW VE pump mounting bracket 1 short gator belt custom spacer/injection pump gear nut to hold the stock gear to the main pump and provide a means to bolt on the VW pulley. (kid in machine class will do it along with my fire rings). and either full custom lines OR find a way to join 2 sets of stock injector lines right before the injectors. replace manual with electric fans, move battery to opposite fender well. http://img541.imageshack.us/img541/9396/dualvethree.jpg Uploaded with ImageShack.us |
HUH really intersting. Hope it works out for you.:tu:
|
if it fails....13 mm p pump :D
|
Yikes! That's a lot of specialized timing to make sure it doesn't know on ya. But then again, they probably need to be a few degrees different for start of injection to end of injection. One thing a coworker and I have talked about is a inline 12 pump, and have the back 6 on dump solenoids. Same theory, different pump set up.
|
nah, both pumps will be timed and sync'd together. might be a 5-10 degree difference but mostly sync'd together. if both pumps use 14mm heads it'd flow around the same cc's as a mild 13mm pump. i just want something unique. but ill just use 12's for now. it wont be hard, just time consuming. good thing winter's coming
|
All times are GMT -5. The time now is 07:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands