![]() |
What turbo is this?
Its a Garret turbo. this is all I could really find on the turbo A/R .55(I think) B/P M-43
http://inlinethumb05.webshots.com/43...600x600Q85.jpg http://inlinethumb59.webshots.com/45...600x600Q85.jpg Thanks |
does it have any sort of numbers on it?
|
2 Attachment(s)
the comp wheel is a 60/80mm and the turbine wheel is 65mm, i have that turbo, they have a t-4 foot its is about 14cm with a dual port w/g.
i'm running one on my truck right now with a modded exhaust housing. mine came off an 7.8 international Attachment 49924 Attachment 49925 |
alwaysworking whats the AFC spacer in your sig?
|
So the turbo that my buddy has is missing the wastegate acutator? So is it worth it to put in my truck?
|
you'd have to pruchase an aftermarket exh manifold for it to bolt up being that alwaysworking has pointed out its a T4 flange. and according to his specs it'd be the same as moding your H1C to those specs. main benefit would be the dual port W/G. no uneven manifold pressures between the front 3 and rear 3 cylinders. the turbo would still boast quicker spool up and higher boost numbers. it may be something worth doing but ATS is the only one that i've seen to make a T4 flanged manifold for the 5.9
|
Originally Posted by Bad93Cummins
(Post 465917)
So the turbo that my buddy has is missing the wastegate acutator? So is it worth it to put in my truck?
you can modify an exhaust housing off an s200 and have a 12cm w/g housing. then youd have a 60/65/12 that sounds really good, the housings are not hard to machine. there are adapters to run the t-4 foot on a t-3 mainifold |
there should be a part # on the cartridge.
|
so the turbo is a 62/65 turbo? Ill try and get some more numbers off of it today.
---AutoMerged DoublePost--- So I would need to find a S200 to modify the ex. housing and make it a 62/65/12 turbo? Is the turbo worth messing with? Ill be getting pod injector's soon, the guy is shipping them monday, would it be a good turbo with those injectors or no? THANKS |
its a 60/65 not a 62
i have a source for exhaust housings if need be. |
Oh okay. how much for an exhuast housing and what size would work good with my Nv4500 5 spd?
also being it a 60/65 would it be a good turbo with my dennyt and pods? ---AutoMerged DoublePost--- Got 2 more picture's, couldn't find anymore #'s on the turbo http://inlinethumb23.webshots.com/45...600x600Q85.jpg http://inlinethumb46.webshots.com/44...600x600Q85.jpg ---AutoMerged DoublePost--- bump |
Unless its free I would not mess with it. Any money you put into it when you outgrow/want to sell it you will never find someone to pay anything for it. Also looking at the bad 1st two pictures, the second one looks like it has alot of corrosion and rust in the compressor... I'm willing to bet it needs to be rebuilt at minimum and maybe even more.... I would pass on it...
Just my opinion. |
Originally Posted by RSWORDS
(Post 467640)
Unless its free I would not mess with it. Any money you put into it when you outgrow/want to sell it you will never find someone to pay anything for it. Also looking at the bad 1st two pictures, the second one looks like it has alot of corrosion and rust in the compressor... I'm willing to bet it needs to be rebuilt at minimum and maybe even more.... I would pass on it...
Just my opinion. |
so its worth nothing to me?
|
Nah. It's worth a slap in the face and a kick in the nuts I think. :moon:
But that deal might not end so well so I would say "fa git a bat it":tttt: |
Originally Posted by Bad93Cummins
(Post 469294)
so its worth nothing to me?
|
Ya that's probley the best way.
|
All times are GMT -5. The time now is 08:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands