5,000$ budget
I have a bone stock 12v an got about 5k to spend what would u do?
|
:humm:Put stacks on it.:jump:
|
5,000$ budget
Lift pump injectors springs plate fuel pin auto or manual tranny?
|
Fully built auto tranny
|
What's your goals for the truck
|
Originally Posted by Red_Rattler
(Post 794759)
What's your goals for the truck
|
:pca1:
|
Cam, Valve springs, head studs, injecotors, airdog or FASS pump, governor spring kit, intake and exhuast, hopefully gauges too? At least thats what I would do with $5000
|
you need a trans/clutch first off.... good quality gauges, 5x.012 injectors, hx40 compressor upgrade, intake, exhaust... could be a stout 400hp reliable truck
|
well if the trans is fully built then Id go with a full set of guages, pyro, trans, boost, and whatever else you want. 4" exhaust- depends, air intake- homemade $100, 4gsk w/ 60lbs valve springs- $226, injectors say 5x14's- $700, turbo I would disagree with the above statement of the hx40, with 5 grand you could afford say an s300- $1000-$1500, afc mods- free, plate-$20-$30, airdog or fass-$500-$700, and maybe some head studs$220? All these prices are really general. But this will definitely put you in the 400hp and over mark. 700-900 ft/lbs torque. I run pretty much a close replica of this setup and really enjoy it. But this is just me, some other veterans might chime in with a dynamite setup for alot cheaper.
|
All times are GMT -5. The time now is 04:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands