Diesel Bombers - push button start?

Diesel Bombers (https://www.dieselbombers.com/)

- 12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)

- - push button start? (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/81488-push-button-start.html)

push button start?

my ignition is shot.. you have to push in super hard to get it to turn over. i was thinkin about a "turn the key to ign then push button to start". i have seen it on the 3rd gen...but has anybody done it on a 2nd gen? anybody know which wire/color to tap? thanks in advance guys

---AutoMerged DoublePost---

lookin at the wire diag....it shouldnt be hard...looks like power on one BP on the push button and either cut or splice onto the yellow wire in the ignition and i should be good... i dont suppose any body wants to check there manuel to make sure my haynes is correct on the color wire?:w2::c:

O man are you in luck, ran across this TODAY! :jump:

https://www.dieselbombers.com/24-val...n-igniton.html

AHA, got it, there ya go man. I'm pretty sure wyodiesel92 and RAWilliams can help you out if you need any more specifics.

:tu::c: thanks for helping out:c: i have NEVER had a question on this site in the last few years i have been here go unanwered...truly is the best bombing forum on the web:c: