What size is this turbo
1 Attachment(s)
there is a turbo on an old concrete mixer at work and i was going to see if its worth taking and putting on my truck. How do i figure out what size it is and if it would work? it has a huge induction into it and the exaust out of it is like 4 or 5 in right off the turbo i dont see number but the warning tag says holeset. can any one help me figure out the size of it
|
Not too sure the exact size, but it does look suitable for a bottom charger in a comopund set up. It would take A LOT of fuel to spool that up as a single.
|
could i use my stock hx35 for a pusher.. and do u think its around a 74mm or something
---AutoMerged DoublePost--- It would take A LOT of fuel to spool that up as a single. -------------------------------------------------------------------------------- how much fuel are we talking what else would i need to spool it |
i had the turbo on my truck as a bottom charger. it sucked. it can work but the housings need changed. it has a T6 flange and is way to big to run as a single. i wouldnt recommend it. thee turbo model i think is a HT60. i had bought the truck with the set up and found out it was pretty rigged.
|
can you get me the engine serial number off the engine and i might be able to tell for sure what model turbo and maybe some specs on it
|
yeah ill try to get it for you ill look tonight if i work if not it will be on monday ...
---AutoMerged DoublePost--- i had the turbo on my truck as a bottom charger. it sucked. it can work but the housings need changed. what would i have to do to my stock charger to use it as a pusher what kinda housing do i need? im just trying to do a cheap twin set up because i can get that turbo for cheap from work.. thanks alot guys |
I am using a stock HX35 as my top charger, and a S400 as my bottom. Spools fast, and produces cold boost.
https://www.dieselbombers.com/5-9l-2...urbos-2-a.html |
both turbos need wastegates too reduce drive pressure. and the hx35 isnt made to ush air through it and will cook itself. mine did it! :tu:
|
On the big holeset it says 24k5 does that mean anything.. And when I do the twin set up can I turn my stock manifold around to get the hX35 up high enough to put the bigger turbo below it
|
Not too sure on the 24K5.
When you do COMPOUNDS, yes you can turn the manifold upside down to make room. That's exactly what I did. |
All times are GMT -5. The time now is 06:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands