Timing issue
On my dads 96 2500 auto that is all stock besides exhaust and intake if you rev it while on park it starts to cut out at about 1800 to 2100 rpm and throws white smoke but before and adtwe those speeds it it just fine and runs good. Is my thinking right about it being the timing?
Sent from my DROIDX using Tapatalk |
Could be but what does the truck do when under a load at those RPM. Whe you build boost it probably will run fine. If you want to reset the timing you can always pin the pump and motor and get it to stock timing.
|
it runs just fine under a load during those rpms
|
I would reset the timing and start from there and see what it does. Probably needs to be advanced a little.
|
Re: Timing issue
Like would 16 degrees be to much for that stock of a truck
Sent from my DROIDX using Tapatalk |
16 would be fine
|
Re: Timing issue
Thanks Ill try that after I get my timing set in
Sent from my DROIDX using Tapatalk |
All times are GMT -5. The time now is 02:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands