Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   No start (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/67755-no-start.html)

-maverick- 01-15-2011 12:55 PM

No start
 
Went to go start my truck today and nothing. Got two new batterys because mine were old. dropped them and same thing happend. I can hear my start bang when i turn the key and thats it. Thinking its worn contacts? in the starter. Batteries are pulling the right voltage. I checked every ground and I have new connectors on all my cables. The only thing im getting is a bang from the starter.

RAW 01-15-2011 01:13 PM

If I read this correctly, you can hear a clunk/bang coming from the starter area, but nothing else? It that is the situation you may be on the right track questioning the solenoid contacts. The clunk/bang would be the starter solenoid throwing he gear out, but no power is getting to the starter motor.

-maverick- 01-15-2011 01:31 PM

yeah thats whats happening. I can hear it when I flip the key and then nothing after that

---AutoMerged DoublePost---

the other day I forgot to plug the truck in and it gave the starter a work out getting her fired up. I think thats what did in those contacts. they are old.

RAW 01-15-2011 01:36 PM

Might be best to replace the entire starter if it is rather old. It may be more then the contacts as well. You could hook your meter up to the starter motor power strap and see how much voltage is there while turning the key over. 0 would indicate a failed solenoid contact disc, 12+ a failed starter motor.

Rexy 01-15-2011 02:16 PM

you could get some heavy duty contacts from larry b cheaper than a new starter

-maverick- 01-15-2011 02:34 PM

Im gona try the contacts and see what happens ordering them now.

-maverick- 01-24-2011 01:20 PM

well i got the contacts today I love how in the package he sends you rubber gloves and a band aid haha

-maverick- 02-07-2011 03:37 PM

Got the new starter contacts in the truck did crank for about 5 seconds and then it stopped, went to try it again and im back to getting the clunk sound i think the starter is shot any other ideas?


All times are GMT -5. The time now is 09:25 AM.


© 2024 MH Sub I, LLC dba Internet Brands