need static degrees to mm conversion
i have the 180hp pump looking for what mm to get 16.5* on the money also what mm for 17*. i have contacted columbus diesel suppy and got 6.55 or 6.65 mm. just thought id check with u guys as well thanks
|
I'd say their full of crap based on this chart. Diesel Timing
I've heard something like 0.2mm more for ever 1* after 16 but not sure on exacts. So you should be at around 5.1 at 16.5 and 5.3 at 17. Not 100% here but that's what the majority of threads I have found are saying. |
1 Attachment(s)
How high do you wanna go?
Attachment 43700 |
so im shooting for 5mm then acording to the 180hp chart?
|
thats right
|
the guy at cds said that it should be 6.55mm or so i even asked about the diffrence in the pumps and if i results in a diffrent mm and he said the cams in the pumps should all be the same :humm: so i should do 5mm then
|
6.55 and youll be in the over 20* range and it will run like chit. Been there(first time timing the pump), filled my garage up with white smoke and couldnt touch the pedal. Reset it to 5mm and runs good.
|
Originally Posted by 96blackcloud
(Post 681516)
the guy at cds said that it should be 6.55mm or so i even asked about the diffrence in the pumps and if i results in a diffrent mm and he said the cams in the pumps should all be the same :humm: so i should do 5mm then
|
alright thanks guys 5mm it is then
|
All times are GMT -5. The time now is 09:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands