problem maybe fuel, maybe timing maybe valves
my truck had a fuel problem when i got it, when i put it to the floor it would spit and sputter. i thought it was just the valvesso i adjusted them, that helped a little, put injectors in it( bosch 370) no difference but more power, put a lift pump in it, big difference. but still runs rough. drove about 30,000 miles and now its back. so i put the old injectors back in and adjusted the valves, that helped alot but still has a slight miss on heavy acceleration. other than that it runs fine. i think its delivery valves but havent got to get thm yet. any info or thoughts helps
|
sounds like it could be the over flow bolt. have u replaced it yet?
|
No I haven't, the banjo bolt for the supply line and return line on the top of the fuel filter housing?
|
no theres a overflow valve in your pump
|
the return line coming out of the pack of your injection pump has a banjo bolt that restricts fuel, and when they go bad, they will do what your describing :tu:
|
|
Where can I get a new one? Cummins?
|
i had one that was doing the same thing an we advanced the timing and it ran great
|
Originally Posted by 95 12v dually
(Post 675688)
Where can I get a new one? Cummins?
Also many of our sponsors should have them Theres also these guys: CUMMINS - Fuel System - Tork Teknology |
Overflow valvE didn't seem to change anything, swapped with a buddies that purs like a kitten, but it didn't change anything
|
All times are GMT -5. The time now is 01:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands