Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   what could be wrong? (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/65703-what-could-wrong.html)

95 cummins ole smokey 12-25-2010 06:12 PM

what could be wrong?
 
ok i have a 95 cummins and it has 140hp injectors, #0 fuel plate, little work done to injecton pump, it ideals fine and runs fine but when i put it to the floor it studers and puts a little cloud of white smoke out?:argh: what is could it be? a friend said an injector might be bad, or the lift pump is going out, or the injection pump needs to be turned up more? but i dont want to harm the tranny or clutch, some one help:nope:

lodal cummins 12-25-2010 06:42 PM

i really think those injectors are a tad bit too big for that stock charger. plus a 0 plate and 140 injectors will toast the clutch if it is stock. white smoke usually means raw fuel! so it could be a bad injector washing you cylinder walls take a whiff of your tail pipe and see if it smells like raw fuel. or it could be possible you timing has slipped. that is just my 2 cents!!!!!

95 cummins ole smokey 12-25-2010 07:18 PM

the clutch seems to hold up just fine, how do i check the timing

c12vpwr 12-26-2010 04:54 PM

check your fuel filter and pre-screen filter my 96 did the same thing when i got it and thats what it wa if thats not it i would check injectors

leroyb1138 12-26-2010 10:45 PM

did you check the bothem fuel filter above the starter

95 cummins ole smokey 01-06-2011 07:59 PM

yea i took it off and turned the filter up side down and mud started falling out from it and i replased the filter with a new one and it still runs a little better but still pops and smokes when thrased on the gas.:humm:

96blackcloud 01-07-2011 05:31 PM

this sounds like a timing problem to me, or a possible air leak. check for leaks in ur fuel lines the especially the rubber lines after the fire wall, did you replace the injector washers with new washers when u put them in? if no leaks are visible check fuel pressure. if its not a leak then ur timing has slipped and it will need to be re timed

leroyb1138 01-10-2011 09:13 AM

1 Attachment(s)
there is a second take this off and clean it with gas let it drie then fill with diesel and put it on
when you start the truck you will have to hold bout 1500 rpm for a minit or it will die and then its a bear to start back

94 12valve 01-10-2011 11:20 AM

check your timing, you will need to find someone that has the timing tools, take it to a shop to have done, or pin time it back to stock.

Where are you located?


All times are GMT -5. The time now is 11:12 PM.


© 2024 MH Sub I, LLC dba Internet Brands