Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   Oil leak under injection pump. (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/51324-oil-leak-under-injection-pump.html)

Zachdeagle 05-23-2010 10:59 PM

Oil leak under injection pump.
 
2 Attachment(s)
Need some help here, have a leak under the injection pump that I can not pinpoint, any help would be greatly appreciated.

12vcummins96 05-25-2010 12:57 PM

it could be the fuel pump :humm:
or the afc housing are all your screws in the afc housing

94 12valve 05-25-2010 01:11 PM

did you check your tappet cover? where is your breather tube?

12vcummins96 05-25-2010 01:13 PM

:nice:
i didnt think about that one dave very nice

gone ropin 05-25-2010 10:44 PM

mine happened when the oil pressure sending unit started leaking thru the plug, weird i know,,

95cumminsguy 05-25-2010 11:45 PM

your best bet to find a leak like that is to go get you some good degreaser and soak it then wash all that oil off so its all clean. Then watch it over the next day or so and you should be able to see excactly where its coming from

Zachdeagle 05-26-2010 07:42 AM

Thanks for all the advice, I cleaned it off with some break cleaner yesterday, and have put about 50 miles on the truck since and the leak has yet to reacure. So maybe it's just a slow accumulation.

FastCR 05-26-2010 11:13 AM

I used the low pressure engine bay degreaser at the local car wash and it did wonders. Mine was leaking out the tappet cover and vacuum pump to timing cover seal.

whiteley 03-10-2011 09:34 AM

My tappet cover is leakin pretty good. When i fix it I was told i will have to retime the motor? Others say I don't. I need some advice. I'll be starting the project this wweekend.

cummins_guy 03-10-2011 01:24 PM


Originally Posted by whiteley (Post 721167)
My tappet cover is leakin pretty good. When i fix it I was told i will have to retime the motor? Others say I don't. I need some advice. I'll be starting the project this wweekend.

no, unless you remove the pump to get it off.


All times are GMT -5. The time now is 10:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands