That road looks familiar. Where at in PA?

Manheim , pa

Maybe not that familiar then. :D

ill have to wait to see what mine is when i get the guage in, is the inlet banjo bolt 12mm anyone?

---AutoMerged DoublePost---

when you clamped the line to 30psi at an idle, what was it at wot??

It sits at 30 and goes to 38-40

The top number never really changes just sit at 30psi at idle.

Banjo bolt is unknown at this time. I think it is 14 by 1.5 but not sure...

If you have a needle valve you dont need a snubber. slowly close your needle valve until you get a smooth reading and then tighten the packing nut (if you have one). The needle valve should be barely cracked.

so the difference in fuel pressure didnt really matter?
im getting a guage soon, dont know whether to get a 0-30 or a 0-100

I would go with 0-100 or 0-50

I just want one so I never run out of numbers on my gauge....