painting stacks?
 

i am going to be doing a single maybe a double idk but im going to paint it black. would i use just some engine enamel or what?

As high temp as you can find. Use some 250 grit sandpaper to rough it up.

get it powder coated if ya can......other wise stove paint

AEROSOL ENGINE ENAMEL-Hirsch Automotive Products check this out bowtech about as high temp as your gonna find:yeah:

i just used engine paint.. no problems with mine, its just gonna get covered in soot anyway lol

I scuffed mine w/ a fine scotch brite, the used VHT ceramic paint good for 1500 degrees. Turned out awesome. :rocking:

I found a can of header paint good to something like 2200 degrees. duplicolor IIRC.

if you ruff it up with 250 grit paper it will show some nasty scratches coarsest i would go with is like 320 or a scotch brite gray fine pad

X2 I'd use some manifold paint

The stacks are far enough away from the motor that they don't get real hot. Any paint will do.