Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   signs of starter going bad (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/36339-signs-starter-going-bad.html)

bowtech 11-15-2009 10:55 PM

signs of starter going bad
 
how do you know when the starter is goin bad what does it do?

coyropin 11-15-2009 11:18 PM

clicks, some times it does nothing

bowtech 11-15-2009 11:44 PM

i thought that it clicks when the battery connection is bad. How much is a starter and how hard is it to do?

Dr. Evil 11-15-2009 11:50 PM

You likely dont need a starter...

Go here:

LarryB's Dodge starting problems solved here.


Get the new contacts and plunger, Solenoid Saver Diode, and add-on Starter Relay kit. If your batteries are good - you wont have any starting problems for a very long time.

Jazz 11-16-2009 05:17 AM

I just did contacts and plunger in mine. Not Larry B's but bought locally cause I was in a hurry to get this fixed before I was left stranded. I think it cost me like $24. Pretty cheap fix compared to a new starter.

coyropin 11-16-2009 05:40 AM

there easy to pull out disconnet your batterys, undo your cables to the starter then pull your three bolts off

monster12valve 11-16-2009 09:28 AM

mine started crankin really slow and the longer it cranked the faster it got.

94 12valve 11-16-2009 11:19 AM

after you turned the key and the truck started my starter used to stay engaged. I had to shut the truck off take the key out and wait for the starter to stop cranking.

Installed LarryB's kit and have never had another problem since.

bowtech 11-16-2009 04:03 PM

how hard to replace the brushes in it?

jaybuller 11-16-2009 04:09 PM

I just ordered the contacts and plunger my question is do i need to pull the starter to install them or is it easy enough to do it with the starter on the truck? thanks. mine wont click but somtimes it just does nothing when i turn the key to start it just goes dead no clicking or anything after i turn the key off then back on a few times it will start.


All times are GMT -5. The time now is 12:58 PM.


© 2024 MH Sub I, LLC dba Internet Brands