break off screw???
 

how do u take the break off screw off of the afc housing?? is there ny other way besides using a torex bit??

I've used a little die grinder to take the head off and also used it to slot the torx so I could use a impact driver with a standard screwdriver bit. Once the head is off the rest of bolt comes right out (usually) just my .2

either that or grind a slot into it and uses a straight sloted screw driver. why are you worried about removing it. mine is still broke off

to get at the fuel plate... n slide the afc full foward :U:
did the head just snap off?? do u need that bolt in to run the truck?

no you dont need the blot, i just drilled the head off mine

are u kidding me????????????? i spent at least n hour trying to get that F******** off :madd: :argh: :argh: thats awsome!! :U:

i spend 2 minutes with a drill and got mine off

X2 :U:

howd u get past all those small metal pipes going to the injectors??

i just knocked the head off that f*^ker with a chisel, and used vice grips to get it out once i had the afc housing off. worked the nuts.:rocking: