Diesel Bombers - how the F do you guys get the afc off?

Page 2 of 2

Show 40 post(s) from this thread on one page

Diesel Bombers (https://www.dieselbombers.com/)

- 12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)

- - how the F do you guys get the afc off? (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/124398-how-f-do-you-guys-get-afc-off.html)

xj_crawler

11-19-2014 01:18 PM

So if I take off the 2-3 lines, when I'm done with the afc put the lines back on and loosen the nut on the bottom going into the pump and crank it over till fuel stats coming out? I just don't wanna screw anything up with my motor.

Just-Another-Dieselguy

11-19-2014 01:55 PM

Leave the tight on the pump side, crack them loose on the nozzle side.
No worrys you are not going to hurt your engine

six speed

11-20-2014 10:17 PM

the good news is that you only have to take two lines loose so it will still start on the other four. that's what i did on mine anyway. no problems.

All times are GMT -5. The time now is 08:17 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page