Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   Overdrive problem or lockup? (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/123312-overdrive-problem-lockup.html)

abuchanan250 09-17-2014 05:40 PM

Overdrive problem or lockup?
 
I went and bought a 94 Dodge 2500 12v with a 1000 mile old tranny and it shifts like butter until overdrive. it shifts into it if im accelerating moderately hard but as soon as I try and keep maybe 50mph it kicks out. Overdrive solenoid bad? or tranny ground?
any help would be sweet. Thanks

JBearSVT 09-17-2014 05:50 PM

Sounds like the TV cable is out of adjustment, or the TPS is bad. Do a google search for "dodge diesel maintenance tips" for a very nice walkthrough on how to diagnose the TPS.

4x4manonbroke 09-17-2014 09:35 PM

I would say your throttle linkage could be out of adjustment, which will cause TPS issues ...

Check out youtube for video's on how to do the adjustments :tu:

lt1z350 09-18-2014 07:41 AM

I work on trans for a living and the output speed sensor can get a dead spot in reading and cause it to drop from 4th. After checking cable if all good there then replace the output speed sensor next.

4x4manonbroke 09-18-2014 04:18 PM

mine was doing the same .. it was tps .. if it were shifting late I would say cable or sensor ..

JBearSVT 09-18-2014 05:21 PM

Never heard of an output speed sensor issue on a pre 98.5 Ram. Hm.

4x4manonbroke 09-18-2014 07:13 PM

Yeah .. if it were an RE trans ( Post 98 ish ) I would say it is possibel .. I think if your running a 12V you have an RH , Or am I wrong for the 2nd time this year ? :humm:

lt1z350 09-18-2014 08:08 PM

Yea didn't look at year it is a govener unit so no speed sensor on that one just the speedo sensor. Also if it has that square switch in the dash I have seen it build up too much resistance and cause it to drop 4th. I have one in my box at work saw it the other day and laughed as thought never use this thing so if comes to that I can get it to u cheap. I also have a new three pin od/tcc solenoid if interested in buying it. Find out what u can get it for and will give u this one at half off that price. Lt1z350@bellsouth.net if wanna email me and talk about it.

JBearSVT 09-19-2014 04:50 PM


Originally Posted by 4x4manonbroke (Post 1073798)
Yeah .. if it were an RE trans ( Post 98 ish ) I would say it is possibel .. I think if your running a 12V you have an RH , Or am I wrong for the 2nd time this year ? :humm:

'98 has the RE. I may be wrong for more like... the tenth time or so this year, but I'm going to go out on a limb and say it was the first year for it, making it one of many 1998 firsts for the 12v before it went out to pasture in 98.5.

4x4manonbroke 09-19-2014 11:36 PM

I just found that out today as well 97's did have RE also ... I guess if it were a problem with O/D or Lock-up .. I would say sensors ... anything else TCM


All times are GMT -5. The time now is 01:18 PM.


© 2024 MH Sub I, LLC dba Internet Brands