Please help!
Ran my cummins out of fuel. I was bleeding the injectors lines and it would spit and spudded couldn't get to run long. I was priming it more and then I got a weird noise in the motor and seems like it is turning over really free. I crank it over my fan spins. It sounds like the start and hitting the flywheel all the way but I no it is cause it's turning over but not running. Any help???
|
so it you hear the starter spinning but not engageing into the flywheel? just a free spin?
|
If i read the gibberish right, he is saying it turns over but it is like it has no compression, spins free. he knows the starter is engaging as the fan spins when he cranks it.
|
Originally Posted by dezeldoc
(Post 1068969)
If i read the gibberish right, he is saying it turns over but it is like it has no compression, spins free. he knows the starter is engaging as the fan spins when he cranks it.
When you were bleading the injectors you took the line nut off correct? not the injector hold down I hope |
Originally Posted by 94 12valve
(Post 1068975)
oh I see
When you were bleading the injectors you took the line nut off correct? not the injector hold down I hope Chris |
Yeah, loosning the returns would be a bad deal too, I always bleed mine @ the pump, usually fires quickly ...
|
Originally Posted by dezeldoc
(Post 1068969)
If i read the gibberish right, he is saying it turns over but it is like it has no compression, spins free. he knows the starter is engaging as the fan spins when he cranks it.
|
Originally Posted by 4x4manonbroke
(Post 1069002)
Yeah, loosning the returns would be a bad deal too, I always bleed mine @ the pump, usually fires quickly ...
|
Originally Posted by xzaq103
(Post 1068976)
:humm:
Chris |
Describe this weird noise it's making.
Why did you crack any lines? I've run mine out of fuel several times, and never had to crack a line or bleed anything to get it running again, just prime the LP by hand and go. |
All times are GMT -5. The time now is 08:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands