Throttle cable mount bracket
http://img.tapatalk.com/d/14/06/28/e5u4yvez.jpg it's not the best picture.. but what size bolt holds this on, one at least is missing.. and there is a bit of play
|
i think its an m6 3/4" long
|
Where is your idle set at.... Im not sure on the bolt size.
|
Idle should be 850 in gear W/Ac on
|
I ask because they like to shake them selves apart at 500rpm....
|
yeah 500 is WAY to low ... :nope:
|
I tried to use a 6mm didn't seem big enough... I'll see if I have a longer one and the idle I believe is at 750 w/o ac on
|
Its a 10mm .. you will need 2 wrenches , one to adjust and the other to jam the nut to hold it in place :tu:
|
http://img.tapatalk.com/d/14/07/01/geputege.jpg
I think it is stripped. It is an 8 mm bolt according to the pump shop I drove to |
Oh dang .. thats not gonna be a fun one ... :td:
|
All times are GMT -5. The time now is 05:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands