Oil problem... Plz help
I have a 96 dodge 3500 5.9l 12 valve. When I start it in the mornings it has perfect oil pressure but once the truck warms up my oil pressure drops to nothing but I can see the gauge move just a little when I idle it up to around 2000rpm but it's still at 0 pressure. I'm not getn any oil to my turbo or to the top of the engine after my pressure drops. I changed oil thinking that would help but still nothing. Does anyone knw what could be wrong?
|
i would say the oil pump is going out. how many miles are on the motor?
|
It has 218xxx miles on it. Do the oil pumps go out on them? There not much to the pump. I really dnt knw much bout diesels. That's y I'm askn questions
|
How many miles?
Could be pump, the relief valve in the filter housing could be stuck open, excessive bearing clearance or possibly a leak in the pickup tube. Considering that it's low after warm up that may be an indicator of bearing clearance issues. Replacing the oil pump and checking the relief spring are fairly simple jobs so you could start with the relief and the the oil pump. It would be rare to experience a pickup issue. Sent from my SCH-I605 using Tapatalk 2 |
I had the oil pump off today but put the old one back one. How can I tell if the old pump is bad?
|
Originally Posted by Bigdonman1
(Post 1044320)
I had the oil pump off today but put the old one back one. How can I tell if the old pump is bad?
Max Tip clearance of .0007" (tip of gerotor to planetary) Max gerotor drive/planetary to port plate .0005" (back plate) Max planetary to housing bore .015" Gear backlash shouldn't exceed .015" Backlash can be a pain to measure on these. What oil are you running? Sent from my SCH-I605 using Tapatalk 2 |
I had rotella 15 45 in it when it started messn up then I put delo400 in it when I changed it but I'm gona change back to rotella when before I change the pump
|
All times are GMT -5. The time now is 10:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands