Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   2009 track bar with conversion kit!?!?!?!?!? (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/116005-2009-track-bar-conversion-kit.html)

new12vguy 10-13-2013 11:51 PM
2009 track bar with conversion kit!?!?!?!?!?
 
[Hi all i am going to order a conversion bracket so i can put a 3rd gen trackbar on my truck but I have one question i went to my local junk yard and got a track bar off an 09 cummins now is this trackbar the same as 03-07 models? From what I can see it is, but I just want to be absolutely sure. Any and all help is appreciated

H.R.D 10-14-2013 01:30 AM
As far as I know it is the same, they didn't change steering until 2010.

new12vguy 10-14-2013 01:44 AM
Finally! Thankyou

---AutoMerged DoublePost---

Originally Posted by H.R.D (Post 1030205)
As far as I know it is the same, they didn't change steering until 2010.
Oh I see your from las cruces! I am in el paso and frequent las cruces as with diesel shops I do not trust any here in el paso. Good to see a fellow member locally!

AMS247 10-14-2013 08:27 AM
03' - 07' used smaller bolts.

07.5' - 11' used a larger sized bolt at both ends.

Shape is the same. Since you found a track bar from an 09', you'll just need to open up the bolt hole on the axle side more, and maybe on the track bar bracket if it was built for the 03' - 07', but nothing that would take more than a couple minutes.

H.R.D 10-14-2013 09:54 PM
Originally Posted by new12vguy (Post 1030206)
Finally! Thankyou

---AutoMerged DoublePost---



Oh I see your from las cruces! I am in el paso and frequent las cruces as with diesel shops I do not trust any here in el paso. Good to see a fellow member locally!
Sweet my friend. Its good to see more folks close to me as well. I have never dealt with any diesel shops around here, I do all my own work. :tu:

Originally Posted by AMS247 (Post 1030239)
03' - 07' used smaller bolts.

07.5' - 11' used a larger sized bolt at both ends.

Shape is the same. Since you found a track bar from an 09', you'll just need to open up the bolt hole on the axle side more, and maybe on the track bar bracket if it was built for the 03' - 07', but nothing that would take more than a couple minutes.

Good info.:tu:

4x4manonbroke 10-14-2013 10:05 PM
Is his on 4x4 ? or does this apply to 2wd also :humm: ?


All times are GMT -5. The time now is 12:27 PM.


© 2024 MH Sub I, LLC dba Internet Brands