Building block and head
Well long story short I bought a truck and am building a 12 valve for it. I'm wanting to get a stable 600-700 hp out of the motor. The block I got with the truck had gotten hot and had melted the #6 piston..I'm wondering what a rough estimate would be to get the whole block bored .20 over? I also got a head that I want some work done to but I'm not exactly sure what... Opinions?
|
x haha
|
If you did the disassembly and everything yourself and they just cut up the block it should only be a coule hundred. If you have them do the machine work and assemble the long block it should only run you around 4,500.
|
Oh sweet I disassembled it and plan on building most of it myself. Do you have any suggestions on what todo with the head? I plan on 150lbs springs from industrial injection but I'm not sure what else should be done
|
port the exhaust side and bowl blend the intake and exhaust. Have your machine shop cut o ring's in either the block or the head and get them to cut your rockers down for head studs
|
All times are GMT -5. The time now is 03:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands