bad ecm??
I have a 1998 dodge 2500 12 valve and have had problems with the batteries running low from time to time good alt and new batteries but one morning it would just crank and crank with no start i suspected shut off solenoid wasnt lifting(which is a 6 month old solenoid) killed my battery so that night with freshley charged battery it started right up but now headlights, radio,and all gauges wont work also the torque converter isnt locking up replaced crank sensor a month ago (wires got caught by fan) and while I had one of the batteries out when I opened the door there was a clicking which sounded like it was comming from the ecm under the dash does this sounds like a fried ecm to me :argh:
what do you guys think?? also no wait to start light ---AutoMerged DoublePost--- and every now and then when i turn the key to start it will just click one time so i try a couple more tmes and she starts |
wow,thats weird, how does the fuses and fusable links in the box in the engine compartment look. I think some of these work some of those things.
|
You should find a qualified shop to take a look for you.
Sent from my DROID RAZR using Tapatalk 2 |
I checked a lot of the fuses and they were good I just want exhaust all other options before I drop the cash on a new ECM
|
Originally Posted by stevestrick77
(Post 994524)
I checked a lot of the fuses and they were good I just want exhaust all other options before I drop the cash on a new ECM
Sent from my DROID RAZR using Tapatalk 2 |
A sign of a bad pcm is no tach the alternator wont charge and no tc lockup or overdrive. I had the same issue I pulled the plugs out of the pcm got my trusty paper clip and multi meter and did some back probing:w2:. The pcm was dead my diagnostic port was also dead because of it. Ill see if I can fine what wires to test. Its easy to do on ur own.
|
Loose battery grounds and connections will do all of that. anything even sota loose and or wiggley is no good. And that truck has a lot of them at the battery. mine did all that when I bought it.
|
If the 5 volt reference voltage is shorted it will shut the ECM down to stop it from burning up. Like everyone else said find a GOOD Tech to diagnose the problem correctly.
|
I have redone all the connections at the post and when I went to check
For any codes it said unable to connect or something along these lines I guess I better find a good shop then |
Originally Posted by stevestrick77
(Post 994832)
I have redone all the connections at the post and when I went to check
For any codes it said unable to connect or something along these lines I guess I better find a good shop then It shouldn't be more than 2 hours to diagnose / confirm computer failure properly. Sent from my DROID RAZR using Tapatalk 2 |
All times are GMT -5. The time now is 09:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands