a friend of mine bought a project boat a year ago and never worked on it and now his wife is begging him to sell it. i have the chance to buy it but i want some of the seasoned boaters input.

it's a 1984 ish Imperial V (he said deep V??) 19.5fter? walk through front window... it's an inboard outdrive with a Chevy 2.5 I-4 freshly rebuilt with over $3500 worth of reciepts on the motor, mercruiser outdrive w/2 different stainless props. new galvanized single axle trailer (easy tilt drive on???), the boat was damaged when the previous owner he bought it from got it. it had a crack in the hull and he took out the floor to patch the hull from the inside and finished it from the outside. it looks un noticable to me that it was repaired. it comes with all new uppulstry, seats and what not, fuel tank, resin and fiberglass mat to put the floor that isn't in it back in it, primer and paint to repaint the hull....

i'm wanting to know

1) how hard is it to put a floor back in one?
2) what is a boat that old worth?
3) how deep of water does there have to be to set this baby afloat? -

Benjamin's Sig:

Click Here To Learn More About BOMBARDIER'S
_______________________
DIESEL BOMBERS
Better Off Modified Baby
-----------------------------------------
Advertising Information

Give Aways - Sweepstakes - Casino - Arcade - Donations - Bomb Bay - Bomb Bar - Bomber Gear

Send In Your Photos And Videos - media@dieselbombers.com

www.TheDieselClassifieds.com

Need To Sell Your Truck Or Performance Parts? CLICK Here For The Diesel Classifieds

REMEMBER SOME PEOPLE ARE ALIVE SIMPLY BECAUSE IT IS ILLEGAL TO SHOOT THEM.

1) not bad could be done in a weekend. Weather is the key this time of year
2) probably less than what he has in the motor
3) 3' with an I/O

Now the bad. The 2.5 wasn't a powerhouse. Don't expect to ski behind it. Their biggest problem is leaks at the exhaust riser.

now a question for you...can you see the patch on the inside? how wide is it covering the crack? how many layers? there are standards when it comes to glass repair. -

Carbon Footprint's Sig:

www.inlandmarinediesel.com
My tool
2005 Ram 2500QC 2WD SB G56. Turned 100k on 5/29/07
My toy
2002 TJ 15spd with some lift and tires

My boat is a 2.5 and will run 42mph wide open and pulls a skier fine. It would go for between $3500 and $4500 around here depending on shape. Since that one still needs work I would guess between $1800 and $2500. I love my boat and it runs dang good on the water for a 17.5ft boat. -

DazedandConfused's Sig:

Andy
1997 Chevrolet 2500 Suburban, 4x4, Auto, 250K miles. Dual exhaust, 285s all the way around it on aluminum wheels. Needs some love but gets me to work.
1984 Ford F-250 project "The Blue Mule" More to come at a later date.

i'm not sure.... haven't looked at it real closely lately. the old man, the previous owner, gave this dude the reciepts for all he did so this guy has very minimal in it and i can get it for that. apparently the old man knew a good bit about boats as my friend said he had 4 or 5 others there that were in perfect shape that were old. this one he was gonna fix up for his grand son and he never bought anything for it let alone came over to help so he said screw that (for lack of better words) and sold it off to my friend. the motor has never been fired off since the rebuild and i know that can be a bad thing so i'll put some MMO down the spark plug holes and let it soak a while before i try anything with it......

so you're saying it's worth say $400? -

I have a Chevy 350 I/O with your name on it if you want it... -

rolloffhill's Sig:

02 Chevy Dmax/Alli Dually, 8.5 HP/17TRQ

Yeah it is worth well more then $400.

Andy -

the hull isn't worth much, 500 or less.
hulls are cheap to come by.

how old is the out drive?
check ebay, mercruisers especially the older ones are easy to get parts for but not worth much.


the interior is a bonus but if the junk you'll need to find an other hull it will fit well in to.

the trailer a good galvanized one i might value it $500-$750


pictures would help is possible -

bow2no1's Sig:

wish i was closer i broke my 4.3 mercruiser -

Boats down yer way should be pretty damn cheap right now with being the off season and drought. I keep thinkin about lookin for a pontoon boat while prices are cheap, just haven't gotten around to it. -

Uncle Bubba's Sig:

99 Quad Cab, 4wd, Drag Comp W/Pump Wire & Boost Elbow installed, K&N Air Canon, MBRP exhaust, Belt Drive Lift Pump and bottom Bulkhead feed from the tank, Isspro EV Pyrometer, Boost Gauge, Fuel Pressure Gauge, DT Pro Fab Trac Bar, South Bend 13-1.25 Con O Clutch, Ranch Hand Bumper, Borgeson Steering Shaft, Black Silicone Boots, 2" Lift Soft Ride Front Coils, Solenoid High Idle Kit, Bilstein 5100 HD Shocks, Rickson 19.5 Wheels w/Hancoock Rubber, HD Maxx Link Sway Bar Links, Superlift dual front stabilizer, EGR Brakes Front and Back, RV275 Injector's, Blue Chip VP44, Prodigy brake controller, B&W Gooseneck hitch and more I can't remember right now. Not to mention more to come I'm sure.
374.2/846.7 at 30psi

i'll try to get some pics of it this wekend when i get home. a friend of mine has been in the boat muffler business for years and knows his fiberglass...... i'm gonna try to get him to go over and look it over with me and let me know what he thinks. -

Me too... -

That's good to have someone who knows about boats to look at it.
I have a 27 'ft and we can ski behind it easy it has a mercruiser they are good.
I love boating. I drive the boat on and off the trailer
I forget the name but their is a site were you can check the value of the your boat something the kelly blue book.
Good luck -

lilrebelgal's Sig:

http://www.myspace.com/cowgirluga13


2002 Sierra 3500 "DUALLEY"4WD Crew Cab 6.6L Duramax Diesel,5 SPD Auto Trans, Allison. Up Grades will follow

Heres a comp
http://www.yachtworld.com/core/listi...quick&is=false
If you can get it for 400. you won't loose if you part it out on fleabay. -

Check out http://www.speedwake.com/upload/myvbindex.php There is many phoyos of this ad many peoe will let you know what to do.. -

Horse Power's Sig:

07 ram 2500. Looking for goodies.

ok well i went and looked at it a little more in the daylight.... haven't taken pics yet but aparently the whole bottom had been cut out and replaced/reinforced/reattached. it looks good just needs a final coat of gelcoat that comes with the boat. it's dirty as all get out but nothing a pressure washer wouldn't fix. i'm working on negotiation the price a little (barter some goods i have that he needs) as my "check is in the mail" for some work i did so when it comes in hopefully the boat will be in my back yard.... -