Love to help, but my stacks were put on in 05. -

Buckshotmckee's Sig:

2006 "Arrest Me Red" Quad, 4x4, 6spd, 3.73, Big Horn Package, Silencer Ring MIA, AFE ProGuard 7 Homemade Torque Tube, Straight Piped with 6'in Tip, Rear Fenderliners, Airhorns, N-Fabs, Leveling Kit

My truck doesn't leak oil! It's sweating Horsepower!!!!!

Member of the $5.00 a gallon club

U.S. Navy Seabee Veteran


"We Build, We Fight, We Drink More Beer!"

These idiots need a good -

Lil Red Express's Sig:

02 Ram 3500 Cummins slush box, Scheid Lightning Pump, Juice/Attitude stacked with a Superchips......

My Mom drives A Cummins
97 Cab/Chassis Pump turned up a little

I just spent the day in court fighting idiots who quite frankly have no clue !!! Before I say anything I just want to say if you have never worn a uniform and served your country or been elected to public office there is still time for each and everyone of you to make a difference in our country and help stop some of the stupidity by voting and supporting someone you know will get the job done in your town. Most importantly SERVE ON A JURY and make damn sure regardless what the BAR Association judges and lawyers say that you decide the case justly and influence the other jurors to use common sense !!!!!!!!!!!!!!

_ Now as for stacks, regardless who has a patent on a kit; you can always design and build your own even if it looks just like their's !!! You just won't be able to build one just like their's for resale (out the front door), unless you change it to be at least 15% different !!!
_ Now as far as inventing stacks in pickup trucks HA! HA! HA! How about a Model-T with four straight pipes from the head all the way to the back of the cab and up through the bed, granted they were only 1" water pipe but hey it was the coolest old truck parked next to the Family Texaco Station with rusty condensed milk cans covering them from the rain ! And in the late sixties we built a set out of old Cadillac drive-shafts because they were like 4"dia. x 6' L and they were hooked to a 265 in my Dad's '57; he also had a '49 Chevy with 8 straight pipes out the back lined up under the bumper hooked to a straight 8 engine (NOT A V)!!!
_ Also I'm willing to bet I have some old photos some where of 60's model Chevy trucks with old Corvette side pipes running up through the bed (where Dodge got the idea for the Lil'Red Express in '78), because it was a COOL in thing to do in the 70's !!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!! -

67Cowboy's Sig:

http://dodgeram.org/sounds/ISBstart.wav

well 67 cowboy find those pics so they can stop these guys and run them in the ground -

jdugie123's Sig:

04.5 D/A MBRP 4" cool duals with muffler delete, volant air intake, EFI Live, Edelbrock 1792 fuel pump, suncoast level IV, ATS copilot, nicktane fuel filter, 6" RCD, 37" BFG KM2s, 4.56 gears, bushwacker cutout fenders

i seen dumber things pulled. i hope to god they dont get it.
tho there really is no chance in hell, unless he handing someone money. i wish i had the address of said person. so i could nail his/her head to a tree with a pick!

---AutoMerged DoublePost---

im glad you still have hope .. i lost mine in 92 after some drunk high guy dove into a pool 3 1/2 feet deep and broke his neck. we had picture of the required no diving , no lifeguard, depth markers etc. and he still won 3.2 million! thank god for inshurance. -

Queeg's Sig:

2001 ram 2500 4x4, rolling 315/75/16`s , auto trans from a nice guy in iowa , got some radio equipment in there. cheesy homemade intake. all stock! sloppy steering, train horn, onboard air. cool stack off a catapiller

Unbelievable..... -

GmcLbz's Sig:

07' Gmc CC/SB, Lbz, Allison

Fingered and Blocked, Diamond Eye Direct Downpipe, 4" Mbrp downpipe back, Airaid CAI w/Amsoil dry filter and prefilter, Autometer A-pillar w/Phantom pyro and 60# boost gauge, UDP tie rod sleeves, Cognito Braces, H2's w/285/70/17 BFGoodrich All Terrains, Airdog 150, Efi Live, Transgo Jr.

We carry all major brands, if you don't see it just ask. We also carry a full line of Valair Clutches, Cooling Mist products, Pure Flow Technologies and Vulcan performance parts.

http://www.upstatedieselperformance.com/

There is a guy in clinton tn that has the stacks on the outside of the truck like the old gas dodges had.To much custom work for me. -

sawmillman's Sig:

1997 4x4 dodge extend cab 5spd bhaf,5'' exhaust,sliencer ring gone,#10 fuel plate,full guages,and 152 db air horns for fun daily tow rig

Well I called them today and spoke with Josh over there. He is going to get with the owners of EEP, and see what they can come up with. I had totaly forgot that they are a Dealer for Grand Rock too! Hopefully they can turn some stuff up and help out! -

crzycowboy's Sig:

GOT STACKS?

Josh Stewart
Grand Rock Tech. Support
www.grpipes.com
Call me at:
1-800-321-3674 (toll free)
1-440-639-2000 (local)
Monday-Friday 7:00a.m. to 3:30p.m.
OR
email me at joshuas@grandrock.com

I emailed this to a friend of mine who is a patent atty. Below is his response:

-

Thanks Droop...do you think that maybe your attorny friend might be willing to talk to someone here if they have any questions? -

-

DieselMinded's Sig:

-------------> To Help Support Diesel Bombers ® <-------------
Donate Any Amount or Become A BOMBARDIER


Diesel Bombers ® Owner
2002 Cummins 4x4 Quad Cab Short Bed
KORE Pace , Suncoast Triple Disk , Pro Loc Valve Body , Super B Turbo , Enterprise Engine 4-12 injectors , Quadzilla Adrenaline w/ Pulse , ATS Intake and Exhaust Manifolds , 4" Turbo Back Diamond Eye Exhaust w/ 5" Black Stainless Steel Tip , Mr. Bob's Hoses , Optima Yellow Tops , Air Dog 150

No kidding. If the patent holds, how are they going to collect from do it your-selfers? How much would the royalty be for dealers for stacks? -

Marine's Sig:

Mike

SSgt USMC

2001.5 2500 4x4 QC.Vulcan Fuel System, GDP Walbro pump, Adrenaline/Pulse, HTB2 62/13 SS, DDP 95 HP Injectors, HTT Pulse Manifold, Silicone boots, Mag-Hytec, BMK-11 Bypass, Amsoil throughout. NRA Member and Instructor.

Become a BOMBARDIER and be qualified for give-aways, see hidden Forums and more!

J.C. Whitney makes inside the bed mounted stacks. A freind of mine put them in his 87 chevy. This was 1999. -

So far I have had no luck on getting any pics or more info. -

sawyer45306's Sig:

1998.5 Dodge Ram 24 V CTD 2500 4x4 reg cab/long bed. 5 speed manual transmission.
Straight Piped turbo back with Black Chrome Tip, AIRDOG FP100, Silencer Ring MIA. BHAF with Heat Shield, Diamond Plate Tool Box and bed rail covers and mud flaps. Stainless Rocker panel covers, grill inserts, fender flares. Simulator hood scoops and bug guard. Euro Style Tail lights. On 285/75/16 Maxxis Buckshot Mudders.

Well I'm on a couple other board so I ask some of the guys for photos and I had a look around the NET , so I have a few here I've just got to share.


http://www.excelerate.com.au/downloa...tang-small.jpg

-

Attached Images

	PICT3568.JPG (128.4 KB, 5 views)
	attachment-2.jpeg (25.4 KB, 8 views)
	attachment.jpeg (74.5 KB, 5 views)
	attachment-3.jpeg (60.9 KB, 4 views)
	pullingpsd1.jpg (55.9 KB, 4 views)
	stack.jpg (61.5 KB, 6 views)
	attachment-5.jpeg (53.2 KB, 1 views)
	attachment-1.jpeg (95.0 KB, 9 views)
	jucewicz3sm.jpg (23.5 KB, 3 views)
	4-945x225.jpg (53.0 KB, 6 views)