Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

please help

Thread Tools
 
Search this Thread
 
  #1  
Old 07-11-2014, 05:18 PM
dangford's Avatar
Newbie
Thread Starter
Join Date: Jul 2014
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default please help

I'm knew to the the site hopefully i am doing the correct i have a 2003 ford f350 with 6.0 i have changed the egr cooler and oil cooler and added a water filter and oil bypass and less than 1000 miles ago changed the ficm and today i stoped at the convenient store and when i came to a stop the truck was idling rough i left it running and came out put in drive went 200 yard and while driving it died and will not start back please if you can help me i will be very grateful i had my friend pull me on home i have changed fuel filters and checked fuel pump it is working thank you
 
  #2  
Old 07-12-2014, 08:31 PM
Adrenaline junkie's Avatar
Diesel Wrench
Join Date: Nov 2012
Location: South New Jersey
Posts: 536
Received 19 Likes on 19 Posts
Default

How many miles? Do you have oil pressure and high pressure oil? Do you keep.maintenance esp oil changes up to date?
 
  #3  
Old 07-12-2014, 09:15 PM
dangford's Avatar
Newbie
Thread Starter
Join Date: Jul 2014
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes I keep the oil changed and I run amsoil in it it has 155500 or close to that
 
  #4  
Old 07-12-2014, 09:18 PM
dangford's Avatar
Newbie
Thread Starter
Join Date: Jul 2014
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default update

I towed it the Ford place today they said it was not building enough oil pressure it was only getting up to 200 psi when turning it over
 
  #5  
Old 07-13-2014, 07:03 PM
Adrenaline junkie's Avatar
Diesel Wrench
Join Date: Nov 2012
Location: South New Jersey
Posts: 536
Received 19 Likes on 19 Posts
Default

Sry to hear. . Let us know how u make out. I'm ordering my dieselsite pump end of week when I can get core out to send in!
 
  #6  
Old 07-13-2014, 07:57 PM
detroitdiesel idi's Avatar
Diesel Enthusiast
Join Date: Nov 2012
Location: michigan
Posts: 421
Likes: 0
Received 37 Likes on 36 Posts
Default

Hpop
 
  #7  
Old 07-18-2014, 02:57 PM
dangford's Avatar
Newbie
Thread Starter
Join Date: Jul 2014
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default last update

I found out that it was the high pressure oil pump and senser thanks for the input
 




All times are GMT -5. The time now is 01:36 PM.