94 F250 Pre power stroke will not rev
#1
94 F250 Pre power stroke will not rev
My 94 F250 Direct injection Turbo diesel will not Rev up at all, it smokes like its getting way to much fuel? I am lost here, I just put a new Map sensor on because my tuner gave me the code indicating that it was bad. Still doing the same thing. Any ideas?
#3
Its the international, i don't have scanner that works for my year, I have a programmer that runs diagnostics, but it showed the map sensor was bad, I replaced it, but still no change
#6
If it's smoking white, and smells like fuel, most likely a fuel problem.
Maybe clogged filter, line, etc.
If it's black, you're getting too much fuel for the air available.
Could be a severely clogged filter, bad turbo, etc.
You may try seeing what it does if you unplug the icp sensor.
All set the truck back to stock and remove the programmer.
Sent from my iPhone using Tapatalk
Maybe clogged filter, line, etc.
If it's black, you're getting too much fuel for the air available.
Could be a severely clogged filter, bad turbo, etc.
You may try seeing what it does if you unplug the icp sensor.
All set the truck back to stock and remove the programmer.
Sent from my iPhone using Tapatalk
The following users liked this post:
DK1981 (03-14-2014)
Thread
Thread Starter
Forum
Replies
Last Post
1ATony
1A Auto Parts
1
01-05-2016 12:03 PM
1ATony
1A Auto Parts
3
12-14-2015 12:30 PM
1ATony
1A Auto Parts
1
10-29-2015 02:11 PM
Diesel Bombers
General Diesel Related
0
12-10-2014 08:10 AM
Diesel Bombers
General Diesel Related
0
10-13-2014 08:10 AM