12 valve build
#1
12 valve build
Im buyin a 12 vavle and am gonna build it up some but need some advice here is what i have so far. Let me know what y'all think.
150-200 Horse injectors/5-.014 or 5-.016
181/191/full cut delivery valves
3 piece exhaut manifold
O-ring/fire ring head gasket
head studs/bolts
66/71/14 turbo: II Super Phat Shaft 66
4gsk
hd valve springs and keeper
overflow vavle
150-200 Horse injectors/5-.014 or 5-.016
181/191/full cut delivery valves
3 piece exhaut manifold
O-ring/fire ring head gasket
head studs/bolts
66/71/14 turbo: II Super Phat Shaft 66
4gsk
hd valve springs and keeper
overflow vavle
#4
Fire rings have a grove cut in the head and block. The fire ring is cut out of the stock head gasket, and another one is set in the two groves. Fire rings unless done perfectly don't like heat cycles. O-rings can be installed in the head, the block, or both. A groove is cut and a stainless wire is installed. The factory headgasket is run with o-rings. O-rings are better suited for street use, and will be all you will ever need.
#6